1apiVersion: compute.gcp.m.upbound.io/v1beta1
2kind: Firewall
FirewallSpec defines the desired state of Firewall
(No description available)
The list of ALLOW rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a permitted connection. Structure is documented below.
An optional list of ports to which this rule applies. This field is only applicable for UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port. Example inputs include: [22], [80, 443], and ["12345-12349"].
The list of DENY rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a denied connection. Structure is documented below.
An optional list of ports to which this rule applies. This field is only applicable for UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port. Example inputs include: [22], [80, 443], and ["12345-12349"].
If destination ranges are specified, the firewall will apply only to traffic that has destination IP address in these ranges. These ranges must be expressed in CIDR format. IPv4 or IPv6 ranges are supported.
This field denotes the logging options for a particular firewall rule. If defined, logging is enabled, and logs will be exported to Cloud Logging. Structure is documented below.
Reference to a Network in compute to populate network.
Policies for referencing.
Selector for a Network in compute to populate network.
Policies for selection.
Additional params passed with the request, but not persisted as part of resource payload Structure is documented below.
If source ranges are specified, the firewall will apply only to traffic that has source IP address in these ranges. These ranges must be expressed in CIDR format. One or both of sourceRanges and sourceTags may be set. If both properties are set, the firewall will apply to traffic that has source IP address within sourceRanges OR the source IP that belongs to a tag listed in the sourceTags property. The connection does not need to match both properties for the firewall to apply. IPv4 or IPv6 ranges are supported. For INGRESS traffic, one of source_ranges, source_tags or source_service_accounts is required.
If source service accounts are specified, the firewall will apply only to traffic originating from an instance with a service account in this list. Source service accounts cannot be used to control traffic to an instance's external IP address because service accounts are associated with an instance, not an IP address. sourceRanges can be set at the same time as sourceServiceAccounts. If both are set, the firewall will apply to traffic that has source IP address within sourceRanges OR the source IP belongs to an instance with service account listed in sourceServiceAccount. The connection does not need to match both properties for the firewall to apply. sourceServiceAccounts cannot be used at the same time as sourceTags or targetTags. For INGRESS traffic, one of source_ranges, source_tags or source_service_accounts is required.
If source tags are specified, the firewall will apply only to traffic with source IP that belongs to a tag listed in source tags. Source tags cannot be used to control traffic to an instance's external IP address. Because tags are associated with an instance, not an IP address. One or both of sourceRanges and sourceTags may be set. If both properties are set, the firewall will apply to traffic that has source IP address within sourceRanges OR the source IP that belongs to a tag listed in the sourceTags property. The connection does not need to match both properties for the firewall to apply. For INGRESS traffic, one of source_ranges, source_tags or source_service_accounts is required.
A list of service accounts indicating sets of instances located in the network that may make network connections as specified in allowed[]. targetServiceAccounts cannot be used at the same time as targetTags or sourceTags. If neither targetServiceAccounts nor targetTags are specified, the firewall rule applies to all instances on the specified network.
A list of instance tags indicating sets of instances located in the network that may make network connections as specified in allowed[]. If no targetTags are specified, the firewall rule applies to all instances on the specified network.
THIS IS A BETA FIELD. It will be honored unless the Management Policies feature flag is disabled. InitProvider holds the same fields as ForProvider, with the exception of Identifier and other resource reference fields. The fields that are in InitProvider are merged into ForProvider when the resource is created. The same fields are also added to the terraform ignore_changes hook, to avoid updating them after creation. This is useful for fields that are required on creation, but we do not desire to update them after creation, for example because of an external controller is managing them, like an autoscaler.
The list of ALLOW rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a permitted connection. Structure is documented below.
An optional list of ports to which this rule applies. This field is only applicable for UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port. Example inputs include: [22], [80, 443], and ["12345-12349"].
The list of DENY rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a denied connection. Structure is documented below.
An optional list of ports to which this rule applies. This field is only applicable for UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port. Example inputs include: [22], [80, 443], and ["12345-12349"].
If destination ranges are specified, the firewall will apply only to traffic that has destination IP address in these ranges. These ranges must be expressed in CIDR format. IPv4 or IPv6 ranges are supported.
This field denotes the logging options for a particular firewall rule. If defined, logging is enabled, and logs will be exported to Cloud Logging. Structure is documented below.
Reference to a Network in compute to populate network.
Policies for referencing.
Selector for a Network in compute to populate network.
Policies for selection.
Additional params passed with the request, but not persisted as part of resource payload Structure is documented below.
If source ranges are specified, the firewall will apply only to traffic that has source IP address in these ranges. These ranges must be expressed in CIDR format. One or both of sourceRanges and sourceTags may be set. If both properties are set, the firewall will apply to traffic that has source IP address within sourceRanges OR the source IP that belongs to a tag listed in the sourceTags property. The connection does not need to match both properties for the firewall to apply. IPv4 or IPv6 ranges are supported. For INGRESS traffic, one of source_ranges, source_tags or source_service_accounts is required.
If source service accounts are specified, the firewall will apply only to traffic originating from an instance with a service account in this list. Source service accounts cannot be used to control traffic to an instance's external IP address because service accounts are associated with an instance, not an IP address. sourceRanges can be set at the same time as sourceServiceAccounts. If both are set, the firewall will apply to traffic that has source IP address within sourceRanges OR the source IP belongs to an instance with service account listed in sourceServiceAccount. The connection does not need to match both properties for the firewall to apply. sourceServiceAccounts cannot be used at the same time as sourceTags or targetTags. For INGRESS traffic, one of source_ranges, source_tags or source_service_accounts is required.
If source tags are specified, the firewall will apply only to traffic with source IP that belongs to a tag listed in source tags. Source tags cannot be used to control traffic to an instance's external IP address. Because tags are associated with an instance, not an IP address. One or both of sourceRanges and sourceTags may be set. If both properties are set, the firewall will apply to traffic that has source IP address within sourceRanges OR the source IP that belongs to a tag listed in the sourceTags property. The connection does not need to match both properties for the firewall to apply. For INGRESS traffic, one of source_ranges, source_tags or source_service_accounts is required.
A list of service accounts indicating sets of instances located in the network that may make network connections as specified in allowed[]. targetServiceAccounts cannot be used at the same time as targetTags or sourceTags. If neither targetServiceAccounts nor targetTags are specified, the firewall rule applies to all instances on the specified network.
A list of instance tags indicating sets of instances located in the network that may make network connections as specified in allowed[]. If no targetTags are specified, the firewall rule applies to all instances on the specified network.
THIS IS A BETA FIELD. It is on by default but can be opted out through a Crossplane feature flag. ManagementPolicies specify the array of actions Crossplane is allowed to take on the managed and external resources. See the design doc for more information: https://github.com/crossplane/crossplane/blob/499895a25d1a1a0ba1604944ef98ac7a1a71f197/design/design-doc-observe-only-resources.md?plain=1#L223 and this one: https://github.com/crossplane/crossplane/blob/444267e84783136daa93568b364a5f01228cacbe/design/one-pager-ignore-changes.md
WriteConnectionSecretToReference specifies the namespace and name of a Secret to which any connection details for this managed resource should be written. Connection details frequently include the endpoint, username, and password required to connect to the managed resource.
FirewallStatus defines the observed state of Firewall.
(No description available)
The list of ALLOW rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a permitted connection. Structure is documented below.
An optional list of ports to which this rule applies. This field is only applicable for UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port. Example inputs include: [22], [80, 443], and ["12345-12349"].
The list of DENY rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a denied connection. Structure is documented below.
An optional list of ports to which this rule applies. This field is only applicable for UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port. Example inputs include: [22], [80, 443], and ["12345-12349"].
If destination ranges are specified, the firewall will apply only to traffic that has destination IP address in these ranges. These ranges must be expressed in CIDR format. IPv4 or IPv6 ranges are supported.
This field denotes the logging options for a particular firewall rule. If defined, logging is enabled, and logs will be exported to Cloud Logging. Structure is documented below.
Additional params passed with the request, but not persisted as part of resource payload Structure is documented below.
If source ranges are specified, the firewall will apply only to traffic that has source IP address in these ranges. These ranges must be expressed in CIDR format. One or both of sourceRanges and sourceTags may be set. If both properties are set, the firewall will apply to traffic that has source IP address within sourceRanges OR the source IP that belongs to a tag listed in the sourceTags property. The connection does not need to match both properties for the firewall to apply. IPv4 or IPv6 ranges are supported. For INGRESS traffic, one of source_ranges, source_tags or source_service_accounts is required.
If source service accounts are specified, the firewall will apply only to traffic originating from an instance with a service account in this list. Source service accounts cannot be used to control traffic to an instance's external IP address because service accounts are associated with an instance, not an IP address. sourceRanges can be set at the same time as sourceServiceAccounts. If both are set, the firewall will apply to traffic that has source IP address within sourceRanges OR the source IP belongs to an instance with service account listed in sourceServiceAccount. The connection does not need to match both properties for the firewall to apply. sourceServiceAccounts cannot be used at the same time as sourceTags or targetTags. For INGRESS traffic, one of source_ranges, source_tags or source_service_accounts is required.
If source tags are specified, the firewall will apply only to traffic with source IP that belongs to a tag listed in source tags. Source tags cannot be used to control traffic to an instance's external IP address. Because tags are associated with an instance, not an IP address. One or both of sourceRanges and sourceTags may be set. If both properties are set, the firewall will apply to traffic that has source IP address within sourceRanges OR the source IP that belongs to a tag listed in the sourceTags property. The connection does not need to match both properties for the firewall to apply. For INGRESS traffic, one of source_ranges, source_tags or source_service_accounts is required.
A list of service accounts indicating sets of instances located in the network that may make network connections as specified in allowed[]. targetServiceAccounts cannot be used at the same time as targetTags or sourceTags. If neither targetServiceAccounts nor targetTags are specified, the firewall rule applies to all instances on the specified network.
A list of instance tags indicating sets of instances located in the network that may make network connections as specified in allowed[]. If no targetTags are specified, the firewall rule applies to all instances on the specified network.
Conditions of the resource.